Vibration plate does not work Possible cause:

1 , the power supply voltage is insufficient ---- The reason is simple , certainly not up to the standard voltage is not working anymore .

2 , the vibration plate and the connection between the controller can cause breakage ---- conductor disconnect power supply was not working properly .

3, the controller causes the fuse blows fuse blows ---- circuit breaker was not working properly !

4 , the coil lead circuit breaker blown ---- does not work !
5, the coil and the frame gap is too small or too big ---- gap is too large to not work !

 6, there are parts stuck in between the coil and the skeleton parts ---- cards also often see the problem !

7 , the vibration plate against a hard object ---- cause vibration or frequency error can not be normal !

Top plate or chassis encounter other equipment vibration plate vibration fatigue or too slow , sporadic or irregular feeding, may be due to :

1 elastic spring break or spring failure .

2 floor plate is too thin or broken .

3 Install countertops defects, lack of hardness . If suspended in the device table, will cause vibration too weak , countertop thickness should be at least 1-1/2 , so as not to absorb vibration , must be equipped with cylindrical foot triangular support piece .

4 countertop is not level , then the flat tops can work !

5 disc with debris affect the normal operation of machinery !

6 coil gap should be as small as possible , there will be unexpected problems if excessive .

7.Machine fast pace cause parts to fall from the vibration plate .